Hoistway Information

The US Residential Elevator system is available in either a Machine Room Less (MRL) or Hydraulic configuration.

The following illustrates the available hoistway configurations for the US Residential Elevator.

Model types: I = In-line, P = Pass-through (front and rear), 9 = 90°, IO = In-line, opposite tower.

To determine tower location and door strike, view from lowest landing looking into hoistway.

The dimensions and specifications on our drawings and website are subject to change without notice. National, regional, and local codes may change at any time. Our local dealers and distributors should be your first contact to determine code compliance for the local installation site.

US Residential Elevator Hoistway Design for in-line models
ILL = In-line opening, left hand tower, left hand strike. ILR = In-line opening, left hand tower, right hand strike (non-standard, field wiring required). IRR = In-line opening, right hand tower, right hand strike. IRL = In-line opening, right hand tower, left hand strike (non-standard, field wiring required).

US Residential Elevator Hoistway Design for pass-through models

PLL = Pass-through openings, left hand tower, left hand strike.
PLR = Pass-through openings, left hand tower, right hand strike (non-standard, field wiring required).
PRR = Pass-through openings, right hand tower, right hand strike.
PRL = Pass-through openings, right hand tower, left hand strike (non-standard, field wiring required).

US Residential Elevator Hoistway Design for 90° models

9LL = 90° openings, left hand tower, left hand strike.
9LR = 90° openings, left hand tower, right hand strike (non-standard, field wiring required).
9RR = 90° openings, right hand tower, right hand strike.
9RL = 90° openings, right hand tower, left hand strike (non-standard, field wiring required).

US Residential Elevator Hoistway Design for opposite tower opening models

IOL = In-line, opposite tower opening, left hand strike.
IOR = In-line, opposite tower opening, right hand strike.